Under What Circumstances Do You Need To Remove The Basin Faucet

    Blockage, water leakage, and inability to store water are the most common problems with basin faucets. Omissions in installation and improper use will lead to problems. When the following "symptoms" appear on the faucet at home, it is necessary to consider dismantling the basin faucet and repairing it. So how do disassemble

    The basin faucet is connected to the angle valve by the water inlet hose and fixed on the basin surface by the fastening nut. When disassembling, mainly start from these two aspects:

    1. Before starting to disassemble the basin faucet, find the water inlet valve. The water inlet valve is usually installed on the wall below the basin. First, screw on the angle valve to cut off the water, otherwise, a lot of running water will be wasted in the process of dismantling the basin faucet;

    2. After screwing on the angle valve, some water will remain in the water pipe, turn on the faucet to drain the remaining water;

    3. When installing the basin faucet, use the water inlet hose to connect the water inlet port of the basin faucet to the angle valve. When disassembling, hold the water pipe with one hand, twist the wrench with the other hand, and remove the end of the water inlet hose connected to the basin faucet;

    4. When installing the basin faucet, it needs to be fastened after connecting the water inlet hose; the nut locks it, so after removing the water inlet hose, find the fastener of the basin faucet and unscrew it with pliers or a wrench. Just take out the basin faucet.