Hot And Cold Water Faucet Leak Repair Steps

The cold and hot faucet can switch between hot and cold water at the same time to meet the different needs of users for cold water and hot water, and it can also be called a mixing faucet. At present, hot and cold water faucets can be divided into basin faucets, vegetable basin faucets, and bathtub faucets according to different places of use. If the faucet appears this

(1) If the hot and cold faucets are controlled by a main water inlet valve, close the main valve first; if the hot and cold water inlet pipes are separated, you need to close the corresponding two valves.

(2) Use a flat-bladed screwdriver to open the hot and cold labels, use a flat-bladed screwdriver to insert into the handle fixing screw hole, and then insert it into the hot and cold label holes, and turn the screwdriver 3 times counterclockwise.

(3) Then grab the faucet handle with your left hand, push it upwards, and tap the handle at the back end of the screwdriver at the same time, first separate the water outlet handle, and then remove the end cover counterclockwise to separate the end cover from the main body.

(4) Use an adjustable wrench to place the hexagonal position of the core body to tighten the hexagonal sleeve, adjust the initial size of the adjustable wrench, turn it counterclockwise, remove the ceramic valve core and check, if it is normal, install it clockwise; if it is damaged, replace the spool with a new one.